 |
IN THE NEWS:
|
|
|
NGK BeCu Ultra (36-42 HRC)ULTRA is a beryllium copper alloy that has been recognized as excellent mold alloy for the plastic mold industry as injection molds and tooling for blow molds. Its optimum combination of high strength, wear resistance, thermal fatigue resistance and thermal conductivity provides several advantages as a mold material. . |
|
|
2083 ESR2083 ESR plastic
mould steel grade with corrosion resistance, good polishability and
good machinability characteristics and supplied in annealed condition. |
|
|
SQ80 (38-42 HRC) SQ80 is
pre-hardened, remelted plastic mould steel with excellent polishability
and suitability for texturing. Good
electrical discharge machinability, machinability and weldability,
suitable for nitriding. |
|
|
SQ 738 HH (320-370 HB) SQ 738 HH is a pre-hardened grade specially designed for large and medium moulds, with high requirements on core strength and good toughness. Its hardness is between 320 – 370 HB. |
|
|
SQ 379SQ 379 is a cold worked tool steel
specially designed to complement conventional AISI D2/2379 type steels.
It allows tool makers to overcome excessive brittleness of conventional
D2 type steels. |
|
|
DIMO 42H
DIMO 42H (Holderblock), developed by Dillinger Hutte
GTS, Germany, is a pre-hardened CrMnMo-alloyed steel for the
construction of plastic moulds. DIMO 42H is applied for accessories
with such holderblock requirements as ejector plates, supports,
clamping plates and housings for diecasting dies. |
For more information on any of the above products please write to info@kimann.com.